UPS Mercury ELITE 2000 PRO VA
Rating input voltage 2000 VA / 1200 W
Rating input frequency 60/50Hz (auto sensing)
Input phase Single-phase
Input socket With Fuse
Cold Start (0 to 100% load) Press the ON/OFF Switch
Input Range (220 V) 140-300
Rating output(VA) 2000
Rating output (W) 1200
Power factor 0.6
Rating output voltage (V) 220
Waveform Battery mode (simulated sine wave),
AC mode(sine wave)
AC Voltage Regulation ±10% (Battery mode)
Rear output socket 4 x Universal – Battery backup
Waveform Simulated Sine Wave (Battery mode)
Line Mode Synchronize with the utility
Rating frequency 60Hz or 50 Hz ± 1 Hz
Battery Mode Yellow flashing
Short circuit protection Line Mode Fuse & Firmware protection
Short circuit protection Battery Mode Firmware Protection
Overload protection Line Mode 110%±5%;
Go to fault mode Line Mode after 5 minutes,
120%±5%; Go to fault mode immediately.
UPS Mercury ELITE 2000 PRO VA
Overload protection Battery Mode 110%±5%; Shutdown after 5 seconds,
120%±5%, Shutdown immediately
Full Protection Overload, discharge, and
Overcharge protection
Transfer Time Typical 2-6 ms, 10 ms max.
Transfer Time Typical 2-6 ms, 10 ms max.
Communication Interface Optional RS232/RJ11
Battery and runtime Rating 2 X 12 V/9 AH
Recharge time – Typical 6-8 hours recover to 90% capacity
Charge current About 1A at normal mode.
Dimension, W X H X D (cm) 22.5 X 12.5 X 39
Net Weight (kgs) 12.7 KGS
Humidity 0-90 % RH @ 0- 40°C (non-condensing)
Compatible with OS Supports Windows®
2000/2003/XP/Vista/2008/7
Communication interface Elite 2000 pro (N/A),
Elite 2000 i pro (USB/RJ11)








Reviews
There are no reviews yet.