Description

CISCO WAP125-E-K9-EU

CISCO WAP125-E-K9-EUProvides cost-effective 802.11ac wireless

Features

●     The Gigabit Ethernet LAN interface can enable a high-speed uplink to the wired network

●     Robust security, including WPA2, 802.1X with RADIUS secure authentication, and rogue access point detection, helps protect sensitive business information

●     A captive portal supports secure, customized guest access with multiple rights and roles

●     Simple installation and an intuitive web-based configuration wizard enable fast, simple deployment and setup in minutes

●     Support for PoE makes installation easy without expensive additional wiring

●     Sleek design with multiple internal antennas and integrated stand

●     Intelligent QoS prioritizes network traffic to help keep critical network applications running at top performance

●     Workgroup Bridge mode lets you expand your network by wirelessly connecting to a second Ethernet network

●     Support for Cisco FindIT Network Management platform offers easy management and control

CISCO WAP125-E-K9-EU

Standards

IEEE 802.11ac, 802.11n, 802.11g, 802.11b, 802.3af, 802.3u, 802.1X (Security Authentication), 802.1Q (VLAN), 802.1D (Spanning Tree), 802.11i (WPA2 security), 802.11e (wireless QoS), IPv4 (RFC 791), IPv6 (RFC 2460)

Cabling type

Category 5e or better

Antennas

Internal antennas optimized for installation on desktop

Led indicators

1 multi function LED

Operating system

Linux

Physical Interfaces

Ports

10/100/1000 Ethernet, with support for 802.3af /at PoE, power port for AC adapter (included)

Power supply

External 12V/1A DC power jack (Energy Star 2.0 compliant with Efficiency Level 6) and 802.3af/at PoE

Buttons

Reset button, power on/off push button

Lock slot

Slot for Kensington lock

LEDs

1 LED

Physical Specifications

Physical dimensions
(W x D x H)

4.85 x 4.85 x 1.25 in. (123 x 123 x 31 mm)

Weight

0.67 lb (303 g)

Network Capabilities

VLAN support

Yes

CISCO WAP125-E-K9-EU

Number of VLANs

1 management VLAN plus 8 VLANs for SSIDs

802.1X supplicant

Yes

SSID-to-VLAN mapping

Yes

Auto-channel selection

Yes

Spanning tree

Yes

Load balancing

Yes

IPv6

Yes

● IPv6 host support
● IPv6 RADIUS, syslog, Network Time Protocol (NTP)
Layer 2

802.1Q-based VLANs, 8 active VLANs plus 1 management VLAN

Security

WPA/WPA2

Yes, including enterprise authentication

Access control

Yes, management Access Control List (ACL) plus MAC ACL

Secure management

HTTPS

SSID broadcast

Yes

Rogue access point detection

Yes

Mounting and Physical Security

Mounting options

Desktop

Physical security lock

Kensington lock slot

Quality of Service

QoS

Wi-Fi Multimedia and Traffic Specification (WMM TSPEC), client QoS

Performance

Wireless throughput

Up to 867-Mbps data rate (real-world throughput will vary)

Recommended user support

Up to 64 connective users, 10 active users

Configuration

Web user interface

Built-in web user interface for easy browser-based configuration (HTTP, HTTPS)

Management

Management protocols

Web browser, Simple Network Management Protocol (SNMP) v3, Bonjour

Remote management

Yes

Event logging

Local, remote syslog, email alerts

Network diagnostics

Logging and packet capture

Web firmware upgrade

Firmware upgradable through web browser, imported or exported configuration file

Dynamic Host Configuration Protocol (DHCP)

DHCP client

IPv6 host

Yes

HTTP redirect

Yes

Wireless

Frequency

Dual bands (2.4 and 5 GHz)

Radio technologies

802.11b: Direct-Sequence Spread-Spectrum (DSSS)

802.11a/g/n/ac: Orthogonal Frequency Division Multiplexing (OFDM)

Modulation types

802.11b: BPSK, QPSK, CCK

802.11a/g/n/ac: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM

WLAN

802.11ac/n

2×2 Multiple-Input Multiple-Output (MIMO) with 2 spatial streams at 5 GHz

2×2 MIMO with 2 spatial streams at 2.4 GHz

20-, 40-, and 80-Mhz channels for 802.11ac

20 and 40 MHz for 802.11n

PHY data rate up to 867Mbps

Data rates supported

802.11a/b/g:

● 54, 48, 36, 24, 18, 12, 9, 6, 11, 5.5, 2, and 1 Mbps
● 802.11n: 6.5 to 300 Mbps
◦ 20-MHz bandwidth: MCS 0-15 for supported data rates
◦ 40-MHz bandwidth: MCS 0-15 for supported data rates

Non-overlapping channels

2.4 GHz

● 802.11b/g
◦ 20 MHz: 3
● 802.11n
◦ 20 MHz: 3
5 GHz

● 802.11a

CISCO WAP125-E-K9-EU

Wireless isolation

Wireless isolation between clients

External antennas

None

Internal antennas

Internal Fixed Planar Inverted-F Antenna (PIFA)

Antenna gain In dBi

Maximum antenna gain of 4.02 dBi on 2.4 GHz

Maximum antenna gain of 5.63 dBi on 5 GHz

Wireless Distribution System (WDS)

Yes

Fast roaming

Yes

Multiple SSIDs

8

Wireless VLAN map

Yes

WLAN security

Yes

Wi-Fi Multimedia (WMM)

Yes, with unscheduled automatic power save

Operating Modes

Access point

Access Point mode, WDS Bridging, Workgroup Bridge mode

Environmental

Power options

IEEE 802.3af Ethernet switch

Cisco Power Injector: SB-PWR-INJ2-xx

AC adapter included, 12V/1A

POE peak power: 6.5W

Compliance

Safety:

Operating temperature

0° to 40°C (32° to 104°F)

Storage temperature

-20° to 70°C (-4° to 158°F)

Operating humidity

10% to 85% noncondensing

Storage humidity

5% to 90% noncondensing

System memory

256 MB RAM

128 MB flash

Package Contents

Minimum Requirements

● Switch/router with PoE support, PoE injector, or AC power adapter
● Web-based configuration: Web browser
Warranty

Access point

Limited lifetime

0

0